Settings:

Select the system panel type ( nationality..if not in the list uses the English type ), enter phone number and user code of your RISCO security system.
You can also optionally enter a name and an icon of reference for the system
(eg home, office, etc. ..) and configure the auxiliary controls.
If you want you can also activate the password request at startup.
Now you're ready to use Security SMS Remote.


Use:

All application information and text messages received by the alarm system.


The status bar indicates the current state of the system: on, off, ready for arming, etc. ...
Click on for status request command.



ARMING/SET command.
PARTIAL/Stay Home command.
( This command does not work on the Prosys series )


DISARMING/UNSET command.
Remaining credit prepaid SIM request.
Close Security SMS Remote.

The commands described above expect a response from the alarm system, displayed on the status bar and / or on the screen.
( at the moment, the status bar change only in the Italian type responses )


The delay in receiving the answer depends on the GSM network congestion, about 20/30 seconds.


Auxiliary commands:


Auxiliary controls can be set as desired, for example if you want to activate output 2 of the panel, you enter the command UUON02
The controls do not provide auxiliary response, for response to the command you need to add RP ( AW in Holland, VASTAUS in Finland,
OD in Czech Republic, SVAR in Sweden ), in our case becomes UUON02RP
For a complete list of possible commands refer to the user manual of RISCO GSM, or ask your installer.


Send the command set
Send the command set
Send the command set (not present on very small screen)
Send the command set (not present on very small screen)

======================================
Note: Go SMS USERS: GO TO MENU-->SETTINGS-->RECIVE SETTINGS AND UNCHECK [Disable other message notification] TO MAKE IT WORK PROPERLY.
======================================

FAQ:

Will be implemented Stay Home command on Prosys system?
NO, this command is not supported in the Prosys protocol.

How much Security SMS Remote ?
There are the costs for sending SMS commands and responses, and depend on the pricing plans used.


 

For informations securitysmsremote@gmail.com

or visit the site www.securityremote.altervista.org

 

* This is not an official RISCO Group application, logos and trademarks are property of RISCO Group and used under authorization.
Does not assume any responsibility for damage due to the use.